- Heavy-duty single pack polyurethane floor coating
- Excellent adhesion and performance
- Available in an extensive colour range
Solvent based - low odour, for interior use only |
Touch Dry: 6-8 hours Overcoatable: 16-24 hours
Coverage: 11-15 square metres/litre |
A general purpose, abrasion resistant, floor enamel based on urethane alkyd. Ideally suitable for floors subject to light to medium traffic. It is widely used as a coating for domestic, industrial, warehouse and storage areas. Areas subjected to heavy traffic, e.g. walkways and garage floors, will require regular maintenance to repair areas which have been damaged or become well worn.
Linotex Floor Enamel is resistant to oil and grease spillages. It should not be used in areas where frequent water washing is required.
Quick drying gives tack free time of 3 hours, in well-ventilated conditions. Ease of application,Resistant to oils and greases ,Normally applied to dry, sound surfaces which must be free from dirt, dust and grease.
A full gloss finish, available from stock in
Standard colours £24.65 per 5 ltrs
White, Black, Tile red, 18E53 Regatta Blue,Royal Green,
00A09, 18B21Tideway Grey, 00A05 Minerva Grey, 18B25 Merlin Grey
Special mix colours from £30.65 per 5 ltrs
Premium colours £35.65 08E51 Safety Yellow, 04E53 Bright red.
An extensive range of RAL AND BRITISH STANDARD colours are
available to order from the MANORMIX scheme.
CONTACT US FOR A PRICE ON SPECIAL MIXED COLOURS Starting from £27.95
Coverage Theoretical coverage is 12.5 sq. metres/litre at 80 microns wet film thickness.
Brush/Roller Two coats should be applied. On new work thin the first coat 2 parts paint to 1 part thinner by volume. Apply evenly using a well-loaded brush/roller. Allow to dry for 16 hours and apply second coat unthinned.
White Spirit is recommended for thinning and cleaning.
Overcoating/Repainting Further coats of Linotex Floor Enamel may be applied after overnight dry
