A quick drying enamel for use on farm and factory machinery, plant, sheet metal and general steel fabrication work where a 30 minute tack free time is essential.
Positive drying gives tack free time of 30 minutes
Ideally suited to spray application
Can be used as a one coat finish directly to bare metal for interior use.
Ideal for wet-on-wet coating (product cannot be easily re-coated after 6 hours).
Coverage Theoretical coverage is 17 sq. metres/litre at 60 microns wet film thickness.
For interior work, Q.D. Enamel can be applied directly to ferrous metal substrates.
Surfaces must be dry, sound and free from dirt, dust, rust and grease. For exterior work, bare exposed surfaces should be suitably primed.
Previously painted glossy surfaces should be lightly abraded prior to application to promote adhesion. Any non-ferrous metals
should be prepared and pretreated.
colours are stocked in 5 litre tins.
An extensive range of BS, RAL
and other colours are available from the MANORMIX Mixing Scheme.
