A purpose designed VOC compliant paints primarily for use in many situations where health and safety issues are paramount.
These anti corrosive finishing paints have been specifically designed as a single coat application by either airless spray or *brush or roller usually to bare or previously painted steelwork, or as an interior multi-surface factory maintenance coating. The main advantages are their low odour, and high flash point coupled with their ability to fully obliterate with a *one coat application”.
[High chroma colours may require two coats. Whilst the spraying grade is not suitable for application by brush and roller, the brushing grade can be applied by airless/air assisted airless or conventional spray]
45% volume solids….. low odour
High build potential
Ease of application, good film build and anti-sag properties.
Contains zinc phosphate.
Dries with an attractive low sheen finish resisting finger marking during transit and storage.
These paints can be applied directly to clean ferrous metal substrates and suitably prepared
previously painted surfaces.
Surfaces must be dry, sound and free from dirt, dust, mill scale, rust and grease.
A semi-matt finish packed in 5 litre containers for the brushing grade.
Available in WHITE & BLACK as standard
Most british standard and RAL colours available
An extensive range of colours is available from the MANORMIX scheme.
FULL BRITISH SANDARD AND RAL COLOURS AVAILABLE.
