- Adheres to all surfaces without sanding
- Use over wood, concrete, plasterboard, Plasticol®, galvanised metal - covers and seals most paintable surfaces
- Ideal for new plaster and other surfaces with up to 12.5 pH
- Great for suspended ceiling tiles and frames
- Smooth flow and great levelling
- Resists grain raise on new wood
- Sands crisply to a power within 2 hours
- Very low odour
- General purpose
- Non-yellowing finish
- Highly durable and washable
- Heavy resin content is self-sealing on porous surfaces
- Dries to a washable, dead-flat-off-white-finish
High hiding formula
One coat is all that is needed to cover and seal most surfaces.
Coverage approximately 10 square meters per litre. On porous or textured surfaces the coverage may be less. Touch dry in minutes, overcoatable in 1 hour in normal drying conditions
High-adhesion
Unique polymers developed and manufactured by ZINSSER allow direct application over glossy surfaces - enamel paints, clear finishes, Formica®, Plasticol®, UPVC, ceramic tile, metals and more - without tedious sanding or surface deglossing.
Great underbody for enamel topcoats
• Resists grain rise
• Flows smoothly and levels evenly
• Sands crisply to a fine powder within two hours.
Ideal for large commercial wall applications
• Self sealing
• Dries fast with very low odour
• Produces a flat, hard, durable and washable finish
• Non-yellowing finish
• Great sprayability
Great general use coating for all interior surfaces
Finished and unfinished walls, suspended ceiling tiles and frames, doors and trim of refits and commercial properties like supermarkets, warehouses, factories - any-where a fast-drying, high-adhesion multi-surface finish is needed.
- Dries to touch in minutes - may sand or recoat within 2 hours
- Tintable to mid tone colours
